Contact Us!

Please fill out the form below or for an immediate response Call Us Today! 888-509-9342.

Business Hours

DayHours
Monday8:00 AM to 6:00 PM
Tuesday8:00 AM to 6:00 PM
Wednesday8:00 AM to 6:00 PM
Thursday8:00 AM to 6:00 PM
Friday8:00 AM to 6:00 PM
Saturday1:00 PM to 3:00 PM
SundayClosed

Maintaining Your Log Home

1.  If you haven't built your log home, you can help or hinder maintenance issues with the start design.  Start by raising the home's foundation at least 6 inches above the ground (some experts recommend as much as 24 inches in insect-prone areas).

2. Use generous roof overhangs (also known as eaves) in your design to protect log walls and roof timbers against the elements.

3. Move water runoff away from your home by getting builder or general contractor recommendations on the best gutters and downspouts.

4. To resist water and insect damage, don't allow any log floor or wall materials to be exposed to the ground.  Use inorganic materials, such as rock, within 12 to 14 inches of the first course of logs.

5. Never use wood mulch, pine straw or other ground covers, which will encourage termites and other insects.

6. To ensure consistency for the life of your home, keep maintenance diary to track any problems and yours solutions.

Landscape

7. Clear all sumps and fallen trees within 50 feet to your home, since these can harbor wood-boring insects and a variety of pests.

8. Watch for tree branches that can be a bridge to your home for nesting insects.

9. When planting, keep shrubbery a minimum of 3 to 5 feet from the walls of your home.  The goal is to enable air to circulate freely around the home to help dry the logs after it rains or snows.

Drainage

10. To stop water runoff, make sure the grading around your foundation slopes away from the home-usually a minimum of 6 inches in the first 6 feet away from the foundation.

11. Even if your builder sloped the soil during construction, this grading can settle and become flat or even slope toward your home.  Don't use topsoil to increase the slope of the grade, which will only act as a sponge.  Use rock or gravel instead, which will shed water.

12. Make sure your downspouts or splash blocks divert rainwater at least 6 to 9 feet way from the home.

13. Install a French drain to keep water hazards away from your home.  These flexible pipes-set trenches filled with gravel-draw in moisture from the surrounding soil and channel it away.

Sealing New Homes

14. Remove mill glaze, road grime and job-site dirt from the logs.  You can do this by using a log-wash solution, sanding, power-washing or media blasting, depending on the condition of your logs.

15. If you elect to wash your logs with a cleaning solution, always remember to apply cleaners from the bottom of the walls upwards, then rise from the top down.  Always make sure to thoroughly rinse the cleaning solution off the walls.  Follow manufacturer's directions.

16. After waiting for the logs to dry, apply a borated preservation and allow to dry.  Next, apply your interior and exterior stains.  Final step:  Apply external sealants if your house requires them.

17. All log homes will need some caulking-regardless of the log profile or construction style-in between log courses, at corners and around windows and doors.  The sealant or chinking you use must be compatible with whatever stain you apply to your home.  Not sure?  Call the manufacture.

Insects
18. If you see signs of termites, call a pro.  Indicators of a problem include frass (a sawdust-like substance) and tunnels in the wood.

19. If carpenter ants have set up shop in your home, locate and destroy their nest with an insecticide and fill holes with caulk.

Roofs & Exposed Timbers

20. Inspect flashing in the valleys of the roof, around the chimney and enclosing plumbing vents to ensure a tight seal against water.  Use roof tar to seal edges that have lifted up.

21. If you have exposed timbers on the underside of your eaves that extend flush with the overhang or protrude past it, the ends of these logs are susceptible to rot.  Check and reseal annually.

Sequence of Events When Restoring an Existing Log Home

1. Repair rot spots, damages and etc. There are specialized epoxy's that repair spongy wood.

2. Clean or strip off the old finish.  Rinse well and allow to dry.  If media blasted,  polish logs with Osborn Brushes and hand sand, then wash surface with Log Wash.  Allow to dry.

3. Bevel Ends of Logs and apply log end seal, the end of a log is the most vulnerable to sun, rain, snow and ice.

4. Borate treatment (optional, but highly recommended). It is an effective way for preventing and eliminating wood decay and wood destroying insect infestations in exterior and interior wood members.

5. Energy Seal areas where water or media entered home.  Apply Check Mate II to cracks and checks.  Allow Energy Seal and Check Mate II to cure at least 3 hours before staining.

6. Always apply Prelude, when home has been media blasted, this allows for the wood surface to be  sealed, then stain can become more uniform in color over the entire home.  Apply High End stain and Clear Coat.

7. Repair, restore chinking if applicable.

Sequence of Events for New Construction

1. Bevel Ends of Log's to except stain.

2. Wash home with Log Wash to remove dirt, brown stains and mill glaze.  Allow to dry.

3. Borate treatment (optional, but highly recommended).  Allow to dry.

4. Seal with Energy Seal.  Apply Check Mate II to cracks and checks.  Allow Energy Seal and Check Mate II to cure at least 3 hours before staining.

5. Apply Stain and High End Clear Coat.

6. Chink home if applicable.

7. Apply Log End Seal.

Why Choose Us?

  • In Business Since 1996
  • Family Owned and Operated
  • Free Estimates
  • Warranties Available